What is the best heat resistant glue?
When needing to make or repair something that is often exposed to extreme heat, it’s important to have the peace of mind that the glue you use for it with be able to withstand that heat. Whether it be for fireplaces, industrial equipment, or even just the interior of a car on a hot day, you glue needs to hold strong. Here are the best heat-resistant glues.
Table of Contents
Bestseller No. 1
Aron Alpha Industrial Krazy Glue-AA900 Aron Alpha 414TXZ (6,000 cps) High Heat (250 F) and Impact Resistant Instant Adhesive 50 g (1.76 oz) Bottle,clear
- Fast curing, ethyl-2 cyanoacrylate instant adhesive; Designed for applications requiring high heat resistance, high peeling resistance, high impact resistance and thermal shock resistance
- No run, gel viscosity (6,000 cps) for gap filling up to 0.008 inches
- Fixture time within 3 seconds on rigid PVC; 5 seconds on Neoprene; 10 seconds on Steel and 30 seconds on Aluminum; Full cure 24 hours
- Shear strength (PSI) on rigid PVC, : 3,600, Steel: 4,300; Impact resistance bonding steel to steel is 7 ft-lbs per square inch; Heat resistance bonding steel to steel after exposure 248 F x 24 hours is 1,700 PSI
- Designed for metal and rubber surfaces and can withstand extreme hot and cold temperatures
Bestseller No. 2
Rutland 500°RTV High Heat Silicone (Black) 2.7 Oz. Tube
- Rutland High Temperature Silicone is a great solution to your sealant and adhesive needs
- Forms a tough and flexible seal
- Will adhere to most clean surfaces including: glass, metal, plastics, fiberglass, wood, brick, and stone.
- Seal fireplace inserts, repair solar panels, apply ceramic tiles to your fireplace surround or heat shielding behind your stove, the uses are endless
- Rated to withstand up to 500° F (260° C)
Bestseller No. 3
Metal Glue, Casting Metal Repair Glue (A+B), High Temperature Heat Resistant Glue for Metal, AB-Metal Adhesive & Liquid Weld for Metal in lieu of Welding- 50 Gram (PASAWA 1001)
- welding glue high strength:- a b glue a liquid weld for metal has high strength and can sustain a load upto 2900 Psi, once welding glue is applied and cured properly.
- Wide-range of applications:- This cold welding liquid can used as metal to metal glue, casting appliance, equally applicable to other surfaces such as wood and concrete. common application as small hole repair in metal , metal to metal adhesive, liquid metal filler, radiator repair and pipe repair.
- long-lasting Bond Strength: forms a strong and stable permanent bond that should last for ages. Once cured, Metal cast iron magic repair glue forms a strong and stable permanent bond, which should be used for many years. can be shaped, tapped, filed, sanded and drilled depending on its purpose.
- Simple-to-Use: The preparation and application are simple and easy, Just mix the weld metal repair paste, sets in minutes, and fully cured in 12-24 hours
- Package-includes: 25 gram of tube A + 25 gram of tube B + Scraper for mixing and applying the metal repair gel to the surface. NOTE: THE PACKAGING SHOWN IN THE PICTURES MAY VARY
Bestseller No. 4
Aron Alpha 412XZ (100 cps) High Heat (250 F) and Impact Resistant Instant Adhesive 50 g (1.76 oz) Bottle
- Fast curing, ethyl-2 cyanoacrylate instant adhesive; Designed for applications requiring high heat resistance, high peeling resistance, high impact resistance and thermal shock resistance
- Medium viscosity (85 cps) type for intermediate gap filling up to 0.006 inches
- Fixture time within 3 seconds on rigid PVC; 5 seconds on Neoprene; 10 seconds on Steel and 30 seconds on Aluminum; Full cure 24 hours
- Shear strength (PSI) on rigid PVC, : 4,300, Steel: 5,000; Impact resistance bonding steel to steel is 7 ft-lbs per square inch; Heat resistance bonding steel to steel after exposure to 248 F x 24 hours is 2,100 PSI
Bestseller No. 5
Metal Repair Glue, 2 Pack Professional Grade Metal to Metal Glue Heavy Duty for Metal, Ceramics and Plastics, High-Temperature Heat Resistant Epoxy Glue for Welding Aluminum, Steel, and DIY Craft
- LONG-LASTING BOND STRENGTH: Our metal glue is of good quality, and we guarantee that your repaired products will last for at least one year. Once cured, metal repair glue can form a strong and stable permanent bond. Compared with traditional epoxy, AB epoxy glue is high adhesion and good hardness, and a certain toughness.
- WIDE APPLICATION: Our metal repair glue is suitable for repairing bonding metals, ceramics, glass, and many plastics. It not only can be used to repair fuel tanks, plumbing, concrete breaks, water tank, and plastic bucket but can be used for boats, cars, fuel tanks, heaters, vases, fence welding car bumpers, and motorcycle crack repair.
- SAFE AND CLEAN: Our metal glue heavy duty is a clean, odorless, and environmentally friendly product, 100% safe. We insist on the production of exclusive metal glue formula, which has passed MSDS, SGS, and various safety reports. We take environmental protection as the concept, to ensure that your repaired products are safe and clean.
- SIMPLE TO USE: The way to use our metal to metal glue is very simple. First, please make the surface clean before the process. Then, Use the pusher to push out the appropriate amount of glue at a 1:1 ratio on a flat surface, and use the stirrer to mix it evenly (usually 5 minutes, if not, it will affect the bonding effect). Last, apply it to the surface and give it 24 hours for full curing.
- 100% REFUND GUARANTEE: We are very confident in the quality of our strong casting glue. If it is damaged due to reasons of quality within 1 year, we will provide a 100% refund to protect the rights of our customers.
The best heat-resistant glue is J-B Weld ExtremeHeat High Temperature Resistant Metallic Paste. Compatible with metals like iron and steel, J-B Weld ExtremeHeat High Temperature Resistant Metallic Paste can withstand temperatures upwards of 1000°F / 537°C and is so strong that it can be a replacement for torch welding. J-B Weld ExtremeHeat High Temperature Resistant Metallic Paste can be used in both professional and home applications and is perfect for things such as outdoor grills, water heaters, pipe connections, mufflers, exhaust manifolds, catalytic converters, fire boxes, and gas and commercial furnaces.
Best Heat-Resistant Silicone Glue
The best heat-resistant silicone glue is Rutland 500°RTV High Heat Silicone Sealant. Perfect for sealing fireplace inserts, Rutland 500°RTV High Heat Silicone Sealant can adhere to just about any material, including but not limited to brick, metal, glass, fiberglass, aluminum, plastics, wood, and stone. Rutland 500°RTV High Heat Silicone Sealant can also be used for repairing solar panels and heat sealing behind stoves and can withstand temperatures upwards of 500° F/260° C.
How to Use Heat-Resistant Glue
- First, read the instructions on your adhesive as some processes may vary and you need to be sure you're doing everything correctly.
- Next, clean both of the substrates with acetone or isopropanol to get rid of any oil or grease.
- After that you can roughen up your substrates as necessary, especially if they are metal.
- Next, put your adhesive of choice onto both of the subrates before pressing them together. Be sure to check on the instructions to make sure that you are using the correct amount of pressure as some will require more than others.
- Finally, check to see if your adhesive needs to be cured at any specific temperature. If room temperature is fine, you can just leave it to cure comepletely.
Best Heat-Resistant Glue for Plastic
The best heat-resistant glue for plastic is Loctite Stik n’ Seal Extreme Conditions Adhesive. Loctite Stik n’ Seal Extreme Conditions Adhesive is resistant to more than just extreme heat, but also extreme cold and moisture as well. It can even be applied onto wet surfaces and still hold just as strong. And while Loctite Stik n’ Seal Extreme Conditions Adhesive is a great heat resistant adhesive for plastic, it also works well on leather, glass, mirror, fabric, ceramic, wood, stone, concrete, and metal-to-porous surfaces.
Best Heat-Resistant Glue for Outdoors
The best heat-resistant glue for outdoors is Permatex High-Temp Red RTV Silicone Gasket. Permatex High-Temp Red RTV Silicone Gasket is resistant to extreme conditions both indoors and out and has a temperature resistance range of -65°F to 650°F. The suggested applications for Permatex High-Temp Red RTV Silicone Gasket are oil pans, timing covers, valve covers, thermostat housings, water pumps, and transmission pans.
The best heat-resistant glue is J-B Weld ExtremeHeat High Temperature Resistant Metallic Paste. The best heat-resistant silicone glue is Rutland 500°RTV High Heat Silicone Sealant. The best heat-resistant glue for plastic is Loctite Stik n’ Seal Extreme Conditions Adhesive. And the best heat-resistant glue for outdoors is Permatex High-Temp Red RTV Silicone Gasket.
There are some that are, yes. But not every heat-resistant glue is also totally waterproof as well, so make sure you check your glue.
No, J-B Weld ExtremeHeat High Temperature Resistant Metallic Paste cannot be used to repair a stove burner grate. The heat is not the issue, but rather that this adhesive cannot offer enough structural support.
No, Rutland 500°RTV High Heat Silicone Sealant is not food-safe and should not be used anywhere that will come into direct contact with food.
For consistent exposure, Loctite Stik n’ Seal Extreme Conditions Adhesive can withstand a temperature range of -56F° to 176F° and for brief temperature exposure it can withstand a temperature range of -56°F to 248°F.
Yes, Permatex High-Temp Red RTV Silicone Gasket works great for repairing exhaust pipes.